Filter
Top Products
Hardware Preparation and Installation
MVME3100 Single Board Computer Installation and Use (6806800M28C)
30
The RTM EEPROM address switches must be set for address $AA in order for this device to be
accessible by MotLoad.
1.5 Installing Hardware
$AC 110 ON OFF OFF
$AE 111 OFF OFF OFF
Table 1-6 EEPROM Address Settings (continued)
Device Address A(2:0) SW1 SW2 SW3
Damage of the Product and Additional Devices and Modules
z Incorrect installation or removal of additional devices or modules may damage the
product or the additional devices or modules.
z Before installing or removing additional devices or modules, read the respective
documentation.
Damage of Circuits
z Electrostatic discharge and incorrect installation and removal of the product can
damage circuits or shorten their life.
z Before touching the product make sure that your are working in an ESD-safe
environment or wear an ESD wrist strap or ESD shoes. Hold the product by its edges and
do not touch any components or circuits.
Product Malfunction
z Switches marked as “Reserved” might carry production-related functions and can
cause the product to malfunction if their setting is changed.
z Do not change settings of switches marked as “reserved”.