Filter
Top Products
Rear Panel Connectors Transition Module
MVME7100 Single Board Computer Installation and Use (6806800E08A)
77
5.5 Rear Panel Connectors
The MVME7216E transition module provides these connectors. All connectors use standard
pin assignments in compliance with the VMEbus specifications.
PMC I/O (PIM) connector J10 routes only power and ground from VME P2 connector. There
are no host I/O signals on this connector. The MVME7100 routes PMC I/O from J14 of PMC
Slot 1 to VME P2 rows A and C. The MVME7216E routes these signals (pin-for-pin) from VME
P2 to PMC I/O module connector J14.
Table 5-2 SEEPROM Address Switch Assignments (RTM)
Position SW4 SW3 SW2 SW1
Function WP A(2) A(1) A(0)
Default (OFF) 0 1 1 1
Table 5-3 Switch Settings and Device Addresses
SW4 SW3 SW2 SW1 A(2:0) Device Address
OFFONONON000$A0
OFFONONOFF001$A2
OFF ON OFF ON 010 $A4
OFF ON OFF OFF 011 $A6
OFF OFF ON ON 100 $A8
OFF OFF ON OFF 101 $AA (default)
OFF OFF OFF ON 110 $AC
OFF OFF OFF OFF 111 $AE
Table 5-4 Transition Module Connectors
Connector Function
J1A, J1B, J1C, J1D COM port connectors
J2A 10/100/1000Mb/s Ethernet connector
J2B 10/100/1000Mb/s Ethernet connector
J10 PIM power/ground
J14 PIM I/O
P2 VME backplane connector