Filter
Top Products
Printer Commands Chapter 5
))))))))))))))))))))))))))))))))))))))))))))
))))))))))))))))))))))))))))))))))))))))))))
410 Operators Manual56
control codes) and will print a label as soon as the number of strings equals the
amount specified by the ^D64 command. At this point, the printer will print a label
and continue to accept data. This mode is useful for interfacing to a device that
transmits raw data, such as a scale or meter.
This is an example of the D63, 64 and 65 Commands...
^A0^D64<CR>
^D57<CR>
12,640,400,,20,36,,1,412<CR>
1,320,270,3,7,1,,4,205,3,,,1,1<CR>
1,35,325,10,1,6,,,,2<CR>
2,320,325,20,1,10,,4<CR>
3,320,305,25,1,10,,4<CR>
4,320,285,25,1,10,,4<CR>
5,35,250,10,1,6,,,,2<CR>
6,230,355,30,1,12<CR>
7,75,133,29,1,13<CR>
7,320,185,20,16,2,,4,2,50,2<CR>
8,75,089,29,1,13<CR>
9,75,045,29,1,13<CR>
10,75,001,29,1,13<CR>
^D56<CR>
^D2<CR>
SHIP FROM:<CR>
MICROCOM CORPORATION<CR>
8333-A GREEN MEADOWS DR., N.<CR>
WESTERVILLE, OH 43081<CR>
SHIP TO:<CR>
Order No: XXX<CR>
77777777777777777777777777777777777777<CR>
88888888888888888888888888888888888888<CR>
99999999999999999999999999999999999999<CR>
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA<CR>
^A3^D63<CR>
^A5^D64<CR>
^A6^D61<CR>
;clear any old settings
;load new format mode
;header
;field info
;field info
;field info
;field info
;field info
;field info
;field info
;field info
;field info
;field info
;field info
;field info
;select RAM format
;begin text entry mode
;data line 01 (protected)
;data line 02 (protected)
;data line 03 (protected)
;data line 04 (protected)
;data line 05 (protected)
;data line 06
;data line 07
;data line 08
;data line 09
;data line 10
;enable auto print and clear text
;tell printer to print after 6 (CR)
;tell printer to start new data entry
at data line 6 instead of 1