Filter
Top Products
Chapter 5 Printer Commands
))))))))))))))))))))))))))))))))))))))))))))
))))))))))))))))))))))))))))))))))))))))))))
410 Operators Manual 65
Text conversion identifiers 32 and 33 refer to human readable UPC bar codes. These identifiers
are designed to be used in conjunction with the UPC bar codes, and do not create the actual bar
codes. They represent
numerical bottom
borders that extend
some of the bar code
lines. These bar code
human readables must
be lined up with the
bottom of the bar codes.
Text conversion
identifiers 28 and 29 are
MSI human readables
that do not border
themselves with bar
lines like 32 and 33.
Their purpose is only to
add the calculated check
digit(s) to
text lines. To design
with these TCI's, select
Bar code Human Readables
a text character generator Figure 14
number and multiply as
with any other text field. Place this field underneath the MSI bar code. TCI 3 works in this same
way but for UPC-A bar codes.
All other bar code human readables only require a text TCI of 1, a user selectable text character
generator, and text positioning under the desired bar code. This field must refer to the bar code
number.