Filter
Top Products
I
Safety Regulations
The printer PP 407 (CI - 4070) and PP 408 (CI - 4080) fulfils the safety
regulations according to UL 1950 and VDE (IEC 950) and CNA/CSA 22.2 / No.
950 for computer systems.
The mains cable must be connected to a ground protected wall-socket. The
selected voltage of the printer needs to agree with the local voltage.
The power plug must be easily accessible at any time so that it can be
disconnected immediately in case of danger or for maintenance purposes.
Comme le câble de secteur sert de dipositif d'arrêt-urgence, sa connexion à
l'imprimante doit être tout le temps accessible.
Before installing the printer, check the surrounding conditions in which the
printer will be placed (see next page, Operating Environment and chapter 1).
During a thunderstorm you should never attempt to connect or disconnect any
data transfer cables.
The power supply should only be opened and checked by authorized personnel.
Repairs and maintenance beyond the descriptions of chapter 4 may only be
attempted by authorized personnel as well. Repairs done inappropriately may
cause damage and severe danger for the user.
There is a warning symbols to draw the user's attention to possible injuries:
This symbol is visible when the top cover has been opened.
It indicates that the print head is extremely hot after long
periods of printing.
Ce signal de danger se présente quand le cache supérieur
de l'imprimante soit retiré pour indiquer que la tête
d'impression peut être extrèmement chaude après imprimer
très longtemps.
This symbol is located on the cover of the cutting device. It
cautions against touching the blade (only CI - 4080).
Ce signal de danger se trouve sur le cache supérieur du
massicot pour indiquer de ne pas toucher le couteau.