Filter
Top Products
Technical Data
6-4
Paper specifications
Paper- Minimum Maximum
width 101.6mm / 4" 420.9mm / 16.57"
height 76.2mm / 3" 558.8mm / 22"
weight
S 1-play 60 g/m² / 16 lb/r 90 g/m² / 24 lb/r
S sheet in form set 40 g/m² / 10 lb/r 60 g/m² / 16 lb/r
S total set 350 g/m² / 91 lb/r
total form set thickness
S printing area 0.5 mm / 0.02"
S area of top glued (only 1.1 mm / 0.044"
paper movement)
S cutter (only CI - 4080) 1.1 mm / 0.044"
Processing sticky labels:
S the surface of a label must by absorbent for the liquid of the ribbon
S labels must not detach from the fanfold paper
S If the edges do not adhere to the paper the label could get stuck under the
shield of the print head
Processing sticky labels on the CI - 4080:
S Cutting through a sticky label leaves glue on the blade, leading to problems
with the cutting device. Small parts of a cut through label could detach from its
paper and get stuck under the shield of the print head or even block the cutter
completely.
Interface
S Parallel Centronics
®
S Serial RS-232-C/V.24
Buffer
S Up to 30 Kbyte in selectable sizes;
optional with RAM Extension up to 160 KB possible