Filter
Top Products
d
Set the event.
Submenu Name Function
Event Settings
Select an operation of the projector when the event
is executed. Select No Change for items that you do
not want to change when the event occurs.
You can set the following item operations.
• Power
• Source
• Power Consumption (disabled during portrait
projection)
• Shutter
• Lamp Relay Mode
Date / Time Settings
Set the date, day of the week, and time to execute
the event. Use the soft keyboard to enter the date
and time.
s "Soft keyboard operations" p.128
e
Select Save, and then press the [ ] button.
To register additional events, repeat steps 3 to 5.
f
Select Setup complete, and then select Yes to finish saving.
Lamp Relay Mode
Specify the date and time to automatically switch to the lamp you want to
turn on.
By switching the lamps, you can reduce the the load on the lamps and
prevent deterioration.
Lamp Relay Mode is only available when Lamp Select is set to Dual or
Single.
s "Selecting the lamp" p.31
When it is set to Dual:
On Off
(120 mi‐
nutes)
On
Lamp 1
12
6
93
On On Off
(120 mi‐
nutes)
On
Lamp 2
12
6
93
12
6
93
: Specified time
Scheduling Function
102