Filter
Top Products
Reading error notification emails
When the mail notification function is set to On and a problem or warning
occurs in the projector, the following email will be sent.
Mail sender: Address for Address 1
Subject: EPSON Projector
Line 1: The projector name where the problem has occurred
Line 2: The IP address set for the projector where the problem has
occurred.
Line 3 and on: Details of the problem
The details of the problem are listed line by line. The main message
contents are listed below.
• Clean Air Filter
• No Air Filter
• Internal error
• Fan related error
• Sensor error
• Lamp timer failure
• Lamp Warning (1)/Lamp Warning (2)
• Lamp out
• Lamp type mismatch
• Incorrect projection mode
• Internal temperature error
• High-speed cooling in progress
• Lamp replacement notification (1)/Lamp replacement notification (2)
• Low Air Flow
• Low Air Flow Error
• Peltier Device error/ Pump Error
• Shutter Warning
• Shutter Error
• Cinema Filter Warning
• Cinema Filter Error
• No-signal
No image signal is input to the projector. Check the connection status or
check that the power for the signal source is turned on.
• Auto Iris Error
• Power Warning. (Ballast) (1)/Power Warning. (Ballast) (2)
• Power Err. (Ballast)
See the following to deal with problems or warnings.
s "Reading the Indicators" p.141
Monitoring and Controlling
188