Filter
Top Products
The illustrations in this guide are for projectors with the standard zoom
lens ELPLS04.
Front/Top
Name Function
A
Handles
Use these handles when carrying the projector. Also, you
can pass an anti-theft wire lock through the handle to
secure the projector.
s "Installing the wire lock" p.112
B
Security slot ( )
The security slot is compatible with the Microsaver
Security System manufactured by Kensington.
s "Installing the wire lock" p.112
Name Function
C
Air intake vent
(Air filter)
Takes in air to cool the projector internally. If dust collects
here it can cause the internal temperature to rise, and this
can lead to problems with operation and shorten the
optical engine's service life. Be sure to clean the air filter
regularly.
s "Cleaning the Air Filter" p.172
s "Replacing the Air Filter" p.179
D
Front feet
When setting up on a desk, turn to extend and retract to
adjust the horizontal tilt.
The front feet can be removed when the projector is
installed on a ceiling.
s "Adjusting the tilt of the projected image (for normal
installment)" p.36
E
Remote receiver
Receives signals from the remote control.
s "Remote control operating range" p.24
F
Interface cover
Remove this cover to connect cables to the ports inside
when connecting the projector to video equipment.
s "Interface" p.16
s "Attaching and Removing the Interface Cover"
p.28
G
Projection lens
Images are projected through here.
H
Interface cover
removal switch
Operate this when removing the interface cover.
s "Attaching and Removing the Interface Cover"
p.28
I
Interface cover
removal button
Operate this when removing the interface cover.
s "Attaching and Removing the Interface Cover"
p.28
J
Cable wiring slot (top)
Remove the cover, and pass the cable up through here.
s "Attaching and Removing the Interface Cover"
p.28
K
Lens replacement
cover
Remove when attaching or removing the lens.
s "Attaching the Projector Lens Unit" p.26
Part Names and Functions
14