Filter
Top Products
Submenu Function
Remote receiver
You can limit the reception of the operation signal from the
remote control.
When set to Off, you cannot perform any operations from
the remote control. If you want to make operations from
the remote control, hold down the [Menu] button on the
remote control for at least 15 seconds to reset the setting to
its default value.
User Button
Select the items in the Configuration menu that you want to
assign to the [User1], [User2], and [User3] buttons on the
remote control. The following items can be assigned.
Power Consumption, Info, Progressive, Geometric
Correction, Multi-Projection, Resolution, Memory, Image
Processing, or On-Screen Display
Test Pattern
You can display a test pattern to adjust the projection
without connecting other equipment when you set up the
projector.
s "Displaying a Test Pattern" p.34
Memory
Perform operations and make settings for the memory
function.
s "Memory Function" p.98
Reset
You can reset all adjustment values on the Settings menu to
their default settings, except for User Button and
Memory.
See the following to return all menu items to their default
settings.
s
"Reset Menu" p.138
* Operating temperature of +45˚C at an altitude of 0 to 1,499 m, and +40˚C at an
altitude of 1,500 to 3,048 m.
Extended Menu
List of Functions
122