Filter
Top Products
This section explains how to replace the lamp and the air filter.
Replacing the Lamp
Lamp replacement period
It is time to replace the lamp when:
• The following message is displayed.
"It is time to replace your lamp. Please contact your Epson projector
reseller or visit www.epson.com to purchase."
The message is displayed for 30 seconds.
• The power indicator is flashing blue, and the Lamp1 or Lamp2
indicator is flashing orange.
s
"Reading the Indicators" p.141
• The projected image gets darker or starts to deteriorate.
Attention
• Make sure you use the specified lamps. When performing portrait projection,
make sure you use the portrait mode lamps.
Standard replacement lamps: ELPLP81 (one pack)/ELPLP82 (two packs)
Portrait mode lamps for replacement: ELPLP83 (one pack)/ELPLP84 (two
packs)
• Do not use standard replacement lamps for portrait projection. Also, only use
the portrait mode lamps for portrait projection.
• Make sure you attach lamps on both Lamp 1 and Lamp 2. Attach the same
type of lamps on both Lamp 1 and Lamp 2.
• The lamp replacement message is set to appear after the following time
periods to maintain the initial brightness and quality of the projected images.
EB-Z10005U/EB-Z10000U/EB-Z11000W/EB-Z11005/EB-Z11000
Standard Lamps
When using Power Consumption continually at Normal: About 1,900 hours
When using Power Consumption continually at Eco: About 3,900 hours
Portrait mode lamps
About 900 hours
EB-Z9875U/EB-Z9870U/EB-Z9900W
Standard Lamps
When using Power Consumption continually at Normal: About 2,400 hours
When using Power Consumption continually at Eco: About 3,900 hours
Portrait mode lamps
About 900 hours
EB-Z9750U/EB-Z9800W/EB-Z9870
Standard Lamps
When using Power Consumption continually at Normal: About 2900 hours
When using Power Consumption continually at Eco: About 3,900 hours
Portrait mode lamps
About 900 hours
Replacing Consumables
175