Filter
Top Products
Category Item Status Display Explanation
Status Information System Temp Warning A high temp warning has occurred.
Internal Warning A warning about the internal system has occurred.
Airflow Decline A low air flow error has occurred.
Lamp1 Warning (S) A lamp warning has occurred. (S: Standard lamps, P: Portrait mode lamps)
Perform the same remedies as when the lamp error has occurred.
Lamp1 Warning (P)
Lamp2 Warning (S)
Lamp2 Warning (P)
Power1 Warning A power warning (Ballast) has occurred.
Power2 Warning
Shutter Warning A shutter warning has occurred. Perform the same remedies as when the shutter error has
occurred.
DirectionWarning The usage angle is out of range. Check the lamp type, and set it at the correct angle.
Lamp Mismatch A lamp types mismatch has occurred.
Clean Filter An air filter notice has occurred.
Source Computer Displays the source name for the connected equipment currently being projected.
BNC
Video
S-Video
HDMI
DVI-D
SDI
LAN
HDBaseT
On-ScreenDisplay On Displays the settings for the On-Screen Display. When set to Off, the menus or messages are
not displayed on the projected images.
Off
Shutter Open Displays the projector's shutter function status.
Close
Reading Status Monitor
154