Filter
Top Products
Submenu Function
Multi-Projection
Make settings when projecting from multiple projectors.
s "Multi-Projection Function" p.80
Projector ID: Set the ID from 1 to 9. Off indicates that no
ID is set.
s "ID Settings" p.39
Scale: When using multiple projectors to project one image,
adjust the range of the image displayed by each projector.
s "Combining Scaled Images" p.89
Color Mode: Set to Multi-Projection (or 3D Multi-
Projection for projecting 3D images).
Color Uniformity: Adjusts the color tone balance for the
whole screen.
s "Color Uniformity" p.183
Edge Blending: Corrects a border between multiple images
to create a seamless screen.
s "Adjust the overlapping area of the images (Edge
Blending)" p.81
Brightness Level: When the brightness of each lamp differs,
set the lamp brightness level between 1 and 5. This item can
be adjusted only when Power Consumption is set to
Normal in the Settings menu.
s
"Correcting the brightness" p.83
Color Matching: Corrects the difference between the tint
and brightness of each projected image.
s "Color Matching" p.85
RGBCMY: You can adjust the Hue, Saturation, and
Brightness for R (red), G (Green), B (Blue), C (Cyan), M
(Magenta), and Y (Yellow) color components.
s "Adjusting RGBCMY" p.86
Black Level: Adjusts the differences in brightness and tone
for areas where images overlap and areas where the images
do not overlap.
s
"Black Level" p.86
Reset: You can reset all adjustment values for the Multi-
Projection menu to their default settings.
Submenu Function
Lamp Select
Select the lamps to be turned on.
s "Selecting the lamp" p.31
Schedule Set‐
tings
You can set the projector's schedule so that it performs a
specific operation at a specified date and time.
s "Scheduling Function" p.100
Language
You can set the language for messages and menus.
Reset
You can reset all adjustment values for the Extended menu
to their default settings. However, the following items are
not reset.
Screen Type, Screen Position, Projection, Direction, High
Altitude Mode, Startup Source Search, Remote Control
Type, Shutter Release, Lens Type, A/V Output, Monitor
Out, Standby Mode, Control Communications, Projector
ID, Color Matching, Lamp Select, Language
See the following to return all menu items to their default
settings.
s "Reset Menu" p.138
* When User's Logo Protection is set to On in Password Protection, you
cannot change settings related to user's logo. You can make changes after
setting User's Logo Protection to Off.
s "Managing Users (Password Protection)" p.107
List of Functions
126