Filter
Top Products
Check Remedy
Is the correct resolution selected?
(Only when projecting computer images)
Set the computer so that the signals being output are compatible with the projector.
s "Supported Monitor Displays" p.218
s Computer's documentation
Is the image direction correct? Make the correct Projection settings in the Extended menu.
s "Installation Settings" p.30
Image colors are not correct
Check Remedy
Do the input signal settings match the signals from the connected
device?
Change the following settings according to the signal for the connected equipment.
• When the image is from a device connected to the Computer input port or the BNC input port
s Signal - Input Signal p.119
• When the image is from a device connected to the Video input port or the S-Video input port
s Signal - Video Signal p.119
Is the image brightness adjusted correctly? Adjust the Brightness setting in the Image menu.
s Image - Brightness p.117
Are the cables connected correctly? Check that all the cables required for projection are securely connected.
Check that no cables are disconnected and that there are no poor contacts in the cables.
s "Connecting Equipment" p.41
Is the
contrast
g
adjusted correctly? Adjust the Contrast setting in the Image menu.
s Image - Contrast p.117
Is the color adjustment set correctly? Adjust the Gamma, RGB, or RGBCMY setting in the Image menu.
s Image - Advanced p.117
s
"Adjusting the Image" p.76
Are the color saturation and tint adjusted correctly?
(Only when projecting images from a video source)
Adjust the Color Saturation and Tint settings in the Image menu.
s Image - Color Saturation, Tint p.117
Problem Solving
164