Filter
Top Products
Corner Wall
Manually correct distortion that occurs when projecting on a surface with
right angles, such as a square pillar or the corner of a room, and adjust the
amount of expansion and contraction.
Project from the front with the horizontal lens shift in the center.
s "Adjusting the Position of the Projected Image (Lens shift)" p.35
a
• Project onto a surface with a right angle.
• If a large amount of adjustment is performed, the focus may not be
uniform even after making adjustments.
• You may not be able to adjust Corner Wall correctly when using the
short throw zoom lens ELPLU02.
Correction method
a
Press the [Menu] button while projecting.
b
Select Geometric Correction from Settings.
c
Select Corner Wall, and then press the [ ] button.
When the message "If this setting is changed, the image may be
distorted." is displayed, press the [
] button again.
d
Select Corner Type, and then press the [ ] button.
Adjusting Projected Images
67