Filter
Top Products
Nothing appears on the external monitor
Check Remedy
Are images being input from a port other than the Computer
input port or BNC input port?
Only RGB signals from the Computer input port or the BNC input port can be displayed on an external
monitor.
Are you projecting a split screen? Only RGB signals projected on the left screen from the Computer input port or the BNC input port can be
displayed on an external monitor.
s "Projecting Two Images Simultaneously (Split Screen)" p.91
Is the projector in standby status? Check that Standby Mode, A/V Output, and Monitor Out in the Configuration menu are set correctly.
s Extended - Standby Mode p.122
s Extended - A/V Settings - A/V Output p.122
s Extended - A/V Output - Monitor Out p.122
I want to change the language for messages and menus
Check Remedy
Change the language setting. Select the Language in the Extended menu.
s Extended - Language p.122
Email is not received even if a problem occurs in the projector
Check Remedy
Is Standby Mode set to Communication On? To use the mail notification function when the projector is in standby, set Communication On in Standby Mode in the
Configuration menu.
s Extended - Standby Mode p.122
Did a fatal error occur and the projector come to a sudden stop? When the projector comes to a sudden stop, email cannot be sent.
If the error state continues, contact your local dealer or the nearest address provided in the Epson Projector Contact
List.
s Epson Projector Contact List
Is power being supplied to the projector? Check that your electrical outlet or power source is functioning correctly.
Is the mail notification function set correctly in the Network menu? An error notification email is sent according to the Mail settings in the Network menu. Check if it is set correctly.
s Network - Mail p.134
Problem Solving
168