Filter
Top Products
5-34
SelecType
Dove
Rev. C
A5 size chap5.mif
10/28/98 Pass 0
L
Proof Sign-off:
Nishi _______
<leadername> _______
<editorname> _______
Before you start printing in the GL/2 mode
You may need to change the printer settings, depending on your
output needs. First, check the printer’s settings to make sure they
match the data you are trying to print. Check the following items;
the information may be necessary later.
Paper size: Printer’s paper size setting
Driver (plotter selection): HP-GL/2 or HP-GL plotters
Pen cofiguration: Pen number, pen width
Plot origin: Center or Corner
Orientation: GLlike, landscape only
LJ4GL2, landscape or portrait
If you need to configure the printer settings, first switch the
emulation and then change the settings using he printer driver,
or SelecType.
c
Caution:
Settings or data saved in the printer RAM (such as downloaded
fonts) may be erased when you change emulation mode.
PS menu
This menu is only available if the optional EPSONScript Level 2
module has been installed.
End Butt, Square, Triangular, Round
Join Mitered, Miteredbeveled, Triangular,
Round, Beveled, None
Pen 0 through 6 0.05 – 5.00 mm in steps of 0.05 mm
Setting Parameters