Filter
Top Products
C-12
Command Summary
Dove
Rev. C
A5 size appc.mif
10/28/98 Pass 0
L
Proof Sign-off:
Nishi _______
<leadername> _______
<editorname> _______
FX mode
Printer commands arranged by topic
The following section lists and describes all FX and LQ commands by topic.
Printer operation
Initialize printer ESC @
Control paper loading/ejecting ESC EM
n
Data control
Carriage return CR
Vertical motion
Form feed FF
Set page length in lines ESC C
n
Set page length in inches ESC C 0
n
Set skip over perforation ESC N
n
Cancel skip over perforation ESC O
Line feed LF
Select 1/8-inch line spacing ESC 0
Select 7/72-inch line spacing ESC 1
Select 1/6-inch line spacing ESC 2
Select n/216-inch line spacing ESC 3
n
Perform n/216-inch line spacing ESC J
Tab vertically VT
Set vertical tabs ESC B
nn
Note:
Your printer will not print characters beyond one page length (set with the ESC C
or ESC C0 commands), while an FX printer might print them.
Horizontal motion
Set absolute horizontal print position ESC $
n1 n2
Set relative horizontal print position ESC\
n1 n2
Set left margin ESC l
n
Set right margin ESC Q
n
Tab horizontally HT
Set horizontal tabs ESC D
nn