Filter
Top Products
6
Troubleshooting and Maintenance
6-21
Dove
Rev. C
A5 size chap6.mif
10/28/98 Pass 0
R
Proof Sign-off:
Nishi _______
<leadername> _______
<editorname> _______
There is not enough memory to print both sides of the document
using the duplex unit. To correct the error, press the
Continue
button on the control panel. If the message remains, reset the
printer as described in "Reset", on page 6-29. You may also be able
to clear this message by turning the printer off, waiting 10
seconds, and then turning it back on.
If you continue to receive this message when printing a particular
page, try simplifying the page by limiting the number of graphics
or reducing the number and size of fonts.
You can also add more memory to the printer as described in
Chapter 3, "Options".
An attempt has been made to use the duplex unit, but the correct
setting has not been made..
The duplex unit is not working correctly. Check the installation
of the unit.
Paper is jammed in the printer. See "Paper jammed at the paper
exit", on page 6-8 for details about removing jams from in the
printer.
Duplex Mem Overflow
Duplex print was off
Duplex Unit Fail
Exiting Paper Jam