Filter
Top Products
3
Options
3-29
Dove
Rev. C
A5 size chap3.mif
10/28/98 Pass 0
R
Proof Sign-off:
Nishi _______
<leadername> _______
<editorname> _______
Face Up Tray
The printer normally outputs paper face down on top of the
printer. If you want face-up output, you can install the optional
Face Up Tray (C81294✽). This tray gives you immediate viewing
of your printed output and is recommended for printing on media
such as labels and transparencies that require a straight-through
paper path.
The Face Up Tray can hold about twenty sheets of media.
Note:
Remember that when you use the face-up tray, you need to allow about
297 mm (about 11.7 inches) at the rear of the printer for the tray and the
ejected media.
Installing the Face Up Tray
To install the face-up tray, follow the instructions below.
1. Find the three mounting holes on the rear of the printer. If you
have installed the optional duplex unit, there will be the
openings on the rear of the vertical unit of the duplex unit.
Locate and insert the three tabs on the face-up tray into these
mounting holes.