Filter
Top Products
Printing
Problem
Solution
Printed characters are
not what you expected
(continued).
Graphic characters or The wrong character table is selected. If
fines are being printed your application program is capable of
instead of the selected sending control codes, specify the italic
italic characters. character table using ESC t
0.
The wrong
international
characters are being
printed.
You can also select the italic character table
by changing a DIP switch setting. To do
this, turn off the power, set DIP switch 1-7
to off; then turn on the power. See
Chapter 3.
The wrong international character set is
selected. If your application program is
capable of sending control codes, specify
the
desired international character set using
ESC R n. See the description of ESC R in
Chapter 9.
You can also select
the
international
character table by changing DIP switch
settings. To do this, turn off the power and
set DIP switches
1-1, 1-2,
and
1-3
to
the
correct positions for
the
character set you
want.
See Chapter 3.
Troubleshooting 7-9