Filter
Top Products
Commands Arranged by Topic
ESC k
Format:
ASCII code:
Decimal:
Hexadecimal :
ESC k n
27
107 n
1B 6B n
Select Typestyle Family
Comments:
This command affects only the Letter Quality typestyle, not draft. If
n = 0, the Roman font is used. To select one of the other typestyles,
use the family number of the font as shown below. For example, to
choose the Prestige font, use 3 for the value of n. The following
values can be used for n:
0: Roman
1: Sans Serif
2: Courier
3: Prestige
4:
Script
5:
OCR-B
6:
OCR-A
7: Orator
8: Orator-S
Typestyle families 2 to 8 are available only if the appropriate font
module is installed, such as the Multi-Font Module.
Overrides the SelecType panel setting and DIP switch font setting.
ESC !
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
ESC ! n
27 33 n
1B 21 n
Master Select
Selects any valid combination of the following modes: 10 cpi, 12 cpi,
proportional, condensed, emphasized, double-strike, double-wide,
italic, and underline. For details on how to set n, see the Selecting
Typestyles With Master Select section in Chapter 4.
Command Summary
9-23