Filter
Top Products
Adjusting the Load Position
Using Micro-adjustment
1.
Make sure that the printer is turned on and that either a single sheet
or continuous paper is ready to be loaded.
2.
Press the LOAD/EJECT
button to feed paper to the loading position.
Then press the
ON LINE
button;
the MULTI-PART
light begins to
blink.
MULTI -
PART
Note:
You
can
use the FORM FEED
and
LINE FEED
buttons for
micro-adjustment only while the
MULTI-PART
light is blinking.
Using the Printer
3-13