Filter
Top Products
Commands Arranged by Topic
Vertical
Motion
FF
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
FF
12
0C
Form Feed
Prints the data in the print buffer and advances the paper to the top
of the next form according to the current page length. When using a
cut sheet feeder, FF ejects the sheet into the stacker.
ESC C
Set Page Length in Lines
Format:
ASCII code:
ESC C n
Decimal:
27 67 n
Hexadecimal:
1B 43 n
Comments:
Sets the page length to n lines in the current line spacing. The value
of n must be from 1 to 127 lines. The top of form position is reset to
the current line.
Overrides the DIP switch page length setting.
ESC C 0
Set Page Length in Inches
Format:
ASCII code: ESC C 0 n
Decimal:
27
67
0
n
Hexadecimal:
1B
43
00
n
Comments:
Sets the page length to n inches. The value of n must be from 1 to 22.
The top of form position is reset to the current line.
Overrides the DIP switch page length setting.
Command Summary
9-13