Filter
Top Products
Testing the Printer
7.
Press the
ON LINE
button to start
the
self test. A list of DIP switch
settings is printed first, followed by a series of characters. The self
test continues until the paper runs out or until you press
the ON
LINE
button.
8.
If the test results are satisfactory and you wish to stop the test,
press the
ON LINE
button. If the test results are not satisfactory, see
Checking the Operation later in this chapter for possible causes and
solutions.
Note:
To resume the test, press the
ON LINE
button once more.
1-18
Setting Up the Printer