Filter
Top Products
Commands Arranged by Topic
ESC b Set Vertical Tabs in Channels
Format:
ASCII code:
ESC b c n1 n2 …. 0
Decimal: 27 98 c n1 n2 … 0
Hexadecimal:
1B 62 c n1 n2 … 00
Comments:
Functions the same as ESC B, except that the variable c selects a
channel for the vertical tabs, which must be from 0 to 7. Therefore,
up to eight sets of vertical tabs can be set. The channels are selected
by ESC /. To clear the tabs in channel c, use ESC b c 0.
ESC /
Select Vertical Tab Channel
Format:
ASCII code:
Decimal:
Hexadecimal:
ESC / c
27 47 c
1B 2F c
Comments:
This command is used to select the vertical tab channel, with the
value of c from 0 to 7. All subsequent VT commands use the channel
selected by this command. If no channel has been selected, channel 0
is used.
9-18
Command Summary