Filter
Top Products
Paper Handling
See this section if a paper problem occurs.
Single sheets do not feed properly
Paper does not feed.
Continuous paper may be left in the printer. Remove the
continuous paper. Set the paper release lever to the single-
sheet position and insert a new sheet.
Paper feeding is crooked or the paper jams.
Turn off the printer and pull out the paper. Make sure the edge
guides are set correctly. Insert a new sheet straight into the
paper guide. Be sure you’re using the right type of paper. See
the paper specifications in the Appendix.
Make sure that the printer cover is closed.
Make sure the paper release lever and paper thickness lever are
set correctly.
Paper does not eject completely.
Use the LF/FF button to eject the page.
Make sure the printer cover is closed.
The paper may be too long. Use paper that is within the
specified range. See the paper specifications in the Appendix.
R
Sunflower-P
Rev.c
A5 size Chapter 6
01/09/96 pass 1
Troubleshooting
6-7