Filter
Top Products
Note:
❏
The printer has a minimum and a maximum loading position. If
you try to advance the loading position beyond these limits, the
printer beeps and the paper stops moving.
❏
When the paper reaches the factory-set loading position, the
printer beeps and paper feeding pauses briefly. Use the factory
setting as a reference point when adjusting the loading position.
6. Press the
Pause
button or send data to the printer to leave the
Micro Adjust mode.
Note:
For both cut sheet and continuous paper, the printer remembers this new
position even after it has been turned off and back on.
Using the Tear-Off Function
After you have finished printing, you can use the tear-off feature
to advance continuous paper on the push tractor to the tear-off
edge of the printer. You can then easily tear off printed sheets.
When you resume printing, the printer automatically feeds paper
back to the loading position so you can save paper that would
normally be lost between documents.
You can use the tear-off feature in two ways: by setting the
default setting to select auto tear-off mode, or by pressing the
Tear Off/Bin
button on the control panel.
R
Sunflower-P
Rev.c A5 size Chapter 3
01/09/96 pass 2
Using the Printer
3-15