Epson LQ-2070 Printer User Manual


 
Buttons
Operate
Press this button to turn the printer on or off.
Pause
Press this button to temporarily stop printing and to resume
printing. To enable the Micro Adjust function, hold down this
button for at least 3 seconds when the printer is in standby mode.
Press it again to disable this function. See “Using Micro Adjust”
later in this chapter for details.
Load/Eject
Press this button to load single-sheet or continuous paper to the
loading position. However, the printer normally loads paper
automatically. If single-sheet paper is already in the loading
position, use this button to eject the sheet. If continuous paper is
in the loading or tear-off position, press this button to feed it
backward to the standby position.
LF/FF
(line feed/form feed)
Press this button briefly to feed the paper forward one line. Hold
the button down to eject a single sheet of paper or advance
continuous paper to the top of the next page. You can also use this
button to load a single sheet of paper from the cut-sheet feeder or
to feed continuous paper from the standby position to the loading
position.
L
Sunflower-P
Rev.c A5 size Chapter 3
01/09/96 pass 2
3-4
Using the Printer