Filter
Top Products
Paper may be jammed near the print head. Look for a paper
jam and remove it.
Make sure the edge guide positions on the paper guide of the
cut sheet feeder are correct. Position the edge guides at the
diamond-shaped guide marks.
There may be only one sheet left in the bin. Add more paper.
Two or more sheets feed at one time.
You may have loaded too many sheets in the cut-sheet
feeder’s bin. Make sure the bin contains no more than 150
sheets.
You may have forgotten to fan the stack of paper before
loading it into the bin. Remove the paper, fan it, and re-load it.
The paper may not have been stored properly. Too much
humidity can cause paper to stick together.
The paper feed is crooked.
The paper may be old or creased. Use only new, clean sheets
of paper.
There may be too much paper in the stacker.
Make sure the paper thickness lever is set correctly.
Make sure the paper guides are set correctly and your paper
is the proper size and quality. See the Appendix for paper
specifications.
L
Sunflower-P
Rev.c
A5 size Chapter 6
01/09/96 pass 1
6-10
Troubleshooting