Filter
Top Products
Using Bi-d Adjustment
When using bidirectional printing, you may notice that the lines in
your printout are not properly aligned. To correct this problem,
use the printer’s Bi-d Adjustment mode as follows:
1. Make sure continuous paper is loaded in the printer.
2. Hold down the
Pause
button while you turn on the printer. The
instructions for adjusting Bi-d alignment are printed, along
with the first set of alignment patterns.
3. Follow the instructions on the printout.
4. After completing Bi-d adjustment, turn off the printer.
Printing Barcodes
Your printer has powerful barcode printing capabilities and
includes the following resident barcode fonts: EAN-13, EAN-8,
Interleaved 2 of 5, UPC-A, UPC-E, Code 39, Code 128, and
POSTNET. See the Appendix for more information about the
Barcode Print command.
L
Sunflower-P
Rev.c A5 size Chapter 3
01/09/96 pass 2
3-18
Using the Printer