Filter
Top Products
3. Push the tractor into the printer’s mounting slots as shown below.
You are now ready to load continuous paper with the front push
tractor. See “Loading paper with the front push tractor” on page
2-21 or “Loading paper with the push/pull tractor combination”
on page 2-27 for instructions.
Removing the tractor from the front push position
If you want to use the tractor in another position, follow the
directions below to remove it. Then see the appropriate section for
installation instructions.
1. Make sure the printer is turned off.
2. Remove any paper that is in the feed path.
2-17
R
Sunflower-P
Rev.c
A5 size Chapter 2
01/19/96 pass 2
Paper Handling
2-15