Filter
Top Products
11. Lift the paper path guide, and rest it against the paper guide.
Note:
Always close the printer cover before printing. The printer stops printing
when the cover is open.
Plugging in the Printer
1. Make sure the printer is turned off.
2. Check the label on the back of the printer to make sure the
voltage matches that of your electrical outlet.
c
Caution:
If the rated voltage and your outlet voltage do not match,
contact your dealer for assistance. Do not plug in the power
cord.
3. If the power cord is not attached to the printer, connect the
appropriate end to the AC inlet on the printer’s rear panel.
4. Plug the power cord into a properly grounded electrical outlet.
Before continuing, test the printer to make sure it is functioning
properly as described in the next section.
1-11
L
Sunflower-P
Rev.c
A5 size Chapter 1
01/09/96 pass 3
1-10
Setting Up the Printer