Filter
Top Products
2. Make sure the print head is at the ribbon installation position as
shown below. If the print head is not at this position, slide the
print head to the correct position (the indented portion of the
paper tension unit).
w
Warning
Never move the printhead while the printer is turned on; this can
damage the printer. Also, the print head may become hot during
use. Always let it cool before you touch it.
3. Remove the ribbon cartridge from its packaging. Then remove
the plastic separator from the middle of the ribbon cartridge
and discard the separator.
1-3
1-4
L
Sunflower-P
Rev.c
A5 size Chapter 1
01/09/96 pass 3
1-6
Setting Up the Printer