Filter
Top Products
6. Insert a sheet of paper between the edge guides until it meets
resistance. Make sure you adjust the edge guides to match the
width of your paper. After a few seconds, the printer feeds the
paper to the loading position and begins printing the self test.
Note:
❏
Always close the printer cover before printing. The printer stops
printing when the cover is open.
❏
If you want to temporarily stop printing the self test, press the
Pause
button. To resume printing, press
Pause
again.
7. To end the self test, first press the
Pause
button. If paper
remains in the printer, press the
Load/Eject
button to eject
the page; then turn off the printer. Here is part of a typical self
test:
1-15
R
Sunflower-P
Rev.c
A5 size Chapter 1
01/09/96 pass 3
Setting Up the Printer
1-13