Filter
Top Products
ISS 408 Integrated Seamless Switcher • Operation 16
Recalling a User Preset
There are three user presets per input. The presets save color, tint, contrast, brightness,
detail, sizing, and centering settings. See User Presets menu, on page 25, to save
and erase presets. Cycle through and recall these memories by repeatedly pressing the
appropriate input button. The LCD panel identifies the recalled preset (see figure 19).
3
3
3
3
Press Button
User Preset #2
Recalled
User Preset #3
Recalled
User Preset #1
Recalled
User Preset #2
Recalled
3
3
Press Button
3
3
Press Button
Figure 19. Recalling User Presets
Auto Imaging an Input
The auto imaging feature automatically sizes and centers the selected input to fill the
screen. Command the auto imaging feature for a specific input by pressing and holding
the appropriate input button until the LCD displays the message Auto Image Input #n.
Release the input button then press and release the input button again. The LCD displays
AutoSizing and Centering Please Wait... until the operation is complete.
Alternatively, using the menu system, you can set this feature to apply the Auto Image
adjustments to every input as it is selected (see Auto Imaging and Auto Memories
submenu, on page 23).