Filter
Top Products
ISS 408 Integrated Seamless Switcher • Programming Guide 37
Cutting or dissolving in swap mode
The switcher issues the following reports when you swap the preview and program outputs
in swap mode:
Tke
X$]
(SIS operation response only) The switcher has
received the SIS “Take” (%) command.
Bsy1
]
The switcher is busy and will not respond to any SIS
commands.
Out1•In
X!
•All (or RGB or Aud)
]
The input to the program output has changed (to the
input that had been switched to preview output).
Out2•In
X!
•All (or RGB or Aud)
]
The input to the preview output has changed (to the
input that had been switched to program output).
Bsy0
]
The switcher is no longer busy and is able to respond
to SIS commands.
Input and Output Video Type
X!
Typ
X%]
A front panel input video type selection has occurred.
X!
is the input number and
X%
is the
input video type.
Rte
X^X&]
A front panel output video format selection has occurred.
X^
is the output resolution and
X&
is the output refresh rate.
Syn
X*]
A front panel output video type selection has occurred.
X*
is the output video format
(RGBHV or RGBS).
Pol
X(]
A front panel output video polarity selection has occurred.
X(
is the output sync polarity.
Picture Adjustments
X@
Col
X1)]
A front panel color adjustment has occurred.
X@
is the output number switched to the
adjusted input and
X1)
is the color variable.
X@
Tin
X1!]
A front panel tint adjustment has occurred.
X@
is the output number switched to the adjusted
input and
X1!
is the tint variable.
X@
Brt
X1@]
A front panel color brightness adjustment has occurred.
X@
is the output number switched to
the adjusted input and
X1@
is the brightness variable.
X@
Con
X1@]
A front panel contrast adjustment has occurred.
X@
is the output number switched to the
adjusted input and
X1@
is the contrast variable.
X@
Hsz
X1#]
A front panel horizontal size adjustment has occurred.
X@
is the output number and
X1#
is the
size variable.