Filter
Top Products
ISS 408 Integrated Seamless Switcher • Programming Guide 50
Command Function
SIS Command
(Host to Unit)
Response
(Unit to Host)
Additional description
PAL film mode
Set PAL film mode
X!
*
X#
*18#
X!
Flm
X#]
X#
: 0 = off (default) 1 = on
Example:
8*1*18#
8Flm01
]
The ISS uses its 2:2 pulldown (PAL)
video processing algorithms to scale
input 8.
Read PAL film mode
X!
*18#
X#]
0 = off 1 = on.
Preview switch mode
Set preview switch mode
X2^
*20# Psm
X2^]
X2^
: 0 = stay mode 1 = swap mode
Example:
1*20#
Psm01
]
The ISS swaps the preview and
program outputs when you perform a
cut or dissolve operation.
Read preview switch mode
20#
X2^]
0 = stay mode 1 = swap mode
Command and Response Table for Advanced Instruction Set Commands
The advanced instruction set consists of four hexadecimal commands for uploading and
downloading all or a portion of the memory of the switcher. These commands are for
use by knowledgeable programmers, and result in a dump of data from (upload) or to
(download) the switcher. Programmers can use the commands to exactly duplicate the
settings among switchers with a minimum of effort.
Command Function
SIS Command
(Host to Unit)
Response
(Unit to Host)
Additional description
Memory backup
Read all memory contents
90 91
{8226 data bytes+1 byte
checksum}
Upload (switcher to control device) all
color, tint, contrast, brightness, detail,
sizing, and centering settings; all user
presets; and all auto memories for all
inputs and both outputs
Write all memory contents
90 92+8226 data bytes+1 byte checksum
Download (control device to switcher)
all color, tint, contrast, brightness,
detail, sizing, and centering settings; all
user presets; and all auto memories for
all inputs and both outputs.
Dn1
]
Read partial contents
X@
90 93
{26 data bytes+1 byte
checksum}
Upload (switcher to control device) color,
tint, contrast, brightness, detail, sizing,
and centering settings; all user presets;
and all auto memories for the input
selected for output
X@
.
Write partial contents
X@
90 94+26 data bytes+1 byte checksum
Download (control device to switcher)
color, tint, contrast, brightness, detail,
sizing, and centering settings; all user
presets; and all auto memories for the
input selected for output
X@
.
Dn1
]