Filter
Top Products
Figure 6-13: Create a New Device
Figure 6-14: Device Configuration Dialog
Device Name: Enter a name for the device.
Network Address: Enter the IP address of device.
Authentication Port: This is a fixed number “443”.
Username: The factory default Username is “super”
Password: The factory default Password is “pass”.
Connection Mode: Select whether the connection mode is “LAN”, “DSL”, “UMTS”, “ISDN 128k’
or “ISDN/Modem V9.0”.
• Click OK. The new device will be added as shown in Figure 6-15.
48