Filter
Top Products
Port: This should be set to “443”.
Allow Write Support: Allows the host to write to the shared drive. Note: This feature may result
in the data on the shared drive being erased, back up all data before enabling this feature.
Device Authentication: The factory default Username is “super” and the default Password is
“pass”.
• Click OK. The new device icon will be changed as shown in Figure 6-18.
Figure 6-18: Drive Redirection Completed
Note: Drive Redirection is only available with Microsoft Windows 2000 and the later.
Note: The Drive Redirection works on a low SCSI level and the SCSI protocol cannot recognize
partitions; therefore the whole drive selected will be shared instead of any particular partition.
Note: While connecting to a legacy KVM switch, select PS/2 mouse for Keyboard/Mouse
setting. Otherwise Hot-keys cannot be used.
6.2.5 Options
Figure 6-19: USB Mass Storage Option
50