Filter
Top Products
PRIMERGY BX600 S2 Basic Unit 157
Troubleshooting and Tips System Switches Itself OFF
16.3 System Switches Itself OFF
Server management has detected an error
Ê In the ServerView program, check the error list or the error log file with the
SCU utility and try to eliminate the error (see manual “PRIMERGY BX Blade
Server Systems: RemoteView Management Blade - User Interface
Description”).
16.4 Screen Remains Dark
Monitor is switched OFF
Ê Switch ON your monitor.
Screen has gone blank
Ê Press any key on the keyboard.
or
Ê Deactivate screen blanking (screen saver). Enter the appropriate password.
Brightness control is set to dark
Ê Set the brightness control to light. For detailed information, see the operating
manual supplied with your monitor.
Monitor power cable or data cable not connected
Ê Switch OFF the monitor.
Ê Check whether the power cable is properly connected to the monitor and to
the grounded insulated socket.
Ê Check whether the data cable is properly connected to the system and
monitor (if it is plugged in with a connector).
Ê Switch on the monitor.