Filter
Top Products
PRIMERGY BX600 S2 Basic Unit 93
Ethernet Switch Blades Installing a LAN Switch Blade
Configuration with a Combination of 2-way and 4-way Server Blades
The following figure illustrates the assignment of the switch blades to the LAN
ports of the server blades in a configuration with two 4-way server blades and
six 2-way server blades.
Figure 47: LAN port assignment with 4-way and 2-way server blades
8.6 Installing a LAN Switch Blade
Depending on the desired configuration, the system can be upgraded with one
additional switch blade.
V CAUTION!
● Read the safety information and the information on handling electro-
static-sensitive components in the section “Components With
Electrostatic-Sensitive Devices” on page 25.
● LAN switch blades must always be installed in slots NET1 and NET3
first (see page 90).
2-way
ABABABABABABABABABAB
Switch blade 1 Switch blade 2
4-way
server
blade 1
4-way
server
blade 2
server blade 1
2-way
server blade 2
2-way
server blade 3
2-way
server blade 4
2-way
server blade 5
2-way
server blade 6