Filter
Top Products
42 PRIMERGY BX600 S2 Basic Unit
Connecting External Devices Installing the Hardware
© cognitas. Gesellschft für Technik-Dokumentation mbH 2007 Pfad: H:\windows\_projekte\Bxz\Betriebsanleitung\Version_Maerz-2007\Archiv\BX600S2_en\blade-us.k04
Connectors on the back of the basic unit
Figure 9: Connectors for external devices
1, 9 Slots for various types I/O blades, connected to the server blades on-board NICs.
These I/O blades can be Ethernet switch blades or Ethernet pass-thru blades, see
“Ethernet LAN Switch Blades” on page 81 and “Ethernet Pass-Thru Blade” on
page 99.
2, 8 Slots for various types I/O blades, connected to the optional I/O modules of the
server blades. These I/O blades can be Ethernet or Fibre Channel switch blades or
pass-thru blades, see “Ethernet LAN Switch Blades” on page 81, “Ethernet Pass-
Thru Blade” on page 99, “Fibre Channel Switch Blade” on page 105 and “Fibre
Channel Pass-Thru Blade” on page 113.
3 Serial port connector on management blade 2 (see also figure 53 on page 100).
Standard serial port, management communication port.
4 LAN connector on management blade 2 (see also figure 53 on page 100). LAN
port, RJ45, 10Mb management LAN.
5 Serial port connector on management blade 1 (see also figure 53 on page 100).
Standard serial port, management communication port.
6 LAN connector on management blade 1 (see also figure 53 on page 100). LAN
port, RJ45, 10Mb management LAN.
7 KVM connector on rear KVM blade, which offers VGA, PS2 keyboard and mouse
support via a special cable (see figure 10 below). The Adv. KVM bladeand the digital
KVM blade also offers a LAN connectors (RJ45, 10 Mb) (see also figure 85 on
page 134).
1
2
3
4
7
6
5
8
9