Filter
Top Products
52 PRIMERGY BX600 S2 Basic Unit
Operating and Indicator Elements Preparation for Use and Operation
© cognitas. Gesellschft für Technik-Dokumentation mbH 2007 Pfad: H:\windows\_projekte\Bxz\Betriebsanleitung\Version_Maerz-2007\Archiv\BX600S2_en\blade-us.k05
5.1.2 The Rear
Figure 16: System operating and indicator elements on the rear
1 Rear identify button
1
Pressing this button lights up the rear identify indicator. The front and
rear identify indicators will be synchronized.
1
Figure 16 shows the operator panel of the standard KVM blade. For further information on
this KVM blade and on the adv. KVM blade, see chapter “KVM Blade” on page 133.
2 Rear identify/Fault indicator (green LED)
1
Lights green: This system has been selected for identification
(identify LED is lit) by pressing the front or rear identify
button.
To deselect the system, press either of the identify
buttons again.
Blinks green: SUM error: A malfunction has occurred in the system.
1 2