Filter
Top Products
78 PRIMERGY BX600 S2 Basic Unit
Adding a Server Blade to the System Server Blades
© cognitas. Gesellschft für Technik-Dokumentation mbH 2007 Pfad: H:\windows\_projekte\Bxz\Betriebsanleitung\Version_Maerz-2007\Archiv\BX600S2_en\blade-us.k07
Installation is the same as for the server blade (see “Inserting the Server Blade”
on page 78).
Inserting the Server Blade
V CAUTION!
Read the safety information and the information on handling electro-
static-sensitive components in the section “Components With Electro-
static-Sensitive Devices” on page 25.
Figure 36: Turning the eject handles into the unlocked position (2-way server blade)
Ê Press the touch points on the inside of the eject handles (1) of the server
blade to disengage the locking mechanism of the handles.
Ê Turn the eject handles outward (2) into the unlocked position.
The 4-way server blade has the same locking mechanism (see figure 37).
Figure 37: Turning the eject handles into the unlocked position (4-way server blade)
I How to install a server blade is described in the following using the
example of a 2-way server blade. 4-way server blades are installed in the
same way.