Filter
Top Products
PRIMERGY BX600 S2 Basic Unit 97
Ethernet Switch Blades Installing a LAN Switch Blade
Removing the Switch Blade
The LAN switch blade is removed in the same way as the dummy module (see
“Removing the Dummy Module” on page 94).
V CAUTION!
Read the safety information and the information on handling electro-
static-sensitive components in the section “Components With Electro-
static-Sensitive Devices” on page 25.
If you remove the LAN switch blade and do not replace it with a new one, you
must insert a dummy module in the empty slot to ensure cooling, to comply with
the applicable EMC regulations (regulations on electromagnetic compatibility)
and for fire protection.
Make sure that the dummy module engages in the slot correctly.