Filter
Top Products
PRIMERGY BX600 S2 Basic Unit 33
Installing the Hardware Installation Steps
4 Installing the Hardware
V CAUTION!
Please note the safety instructions in the chapter “Important Notes” on
page 21.
Do not expose the PRIMERGY BX600 S2 basic unit to extreme environ-
mental conditions (see section “Technical Data” on page 15). Protect it
from dust, moisture, and heat.
4.1 Installation Steps
The installation steps are described in detail in the following sections of this
chapter:
● Unpacking the basic unit (see section “Unpacking the Basic Unit” on
page 34).
● Mounting the basic unit in the rack (see section “Installing the System in the
Rack” on page 35 and also the layout arrangement on the order lists).
● Cabling the basic unit (see section “Connecting External Devices” on
page 41). See also the section “Cable Routing” on page 43 and the section
“Instructions on Connecting and Disconnecting Cables” on page 45.
● Connecting the basic unit to the mains voltage (see section “Connecting the
System to the Mains” on page 46).