Filter
Top Products
USING SETUP MODE
Table 5.2 Required Options (Cont.)
Item Option Function
HARDWR
BAUD-RT
al interface
options selected on the printer must be the same
ill
ter.
E FORMAT
If you have a serial interface, the seri
PROTOCL
DSR
DUPLEX
CTS
CD
as the settings you selected using your software or
your computer operating system. If the settings
are not the same, the printer will not print or w
print garbage.
See the section Hardware Items and Options
later in this chap
ADJU ou are not using software to specify the top
margin of the page, use the printer’s default top-
and Options later in this chapter.
ST None If y
of-form setting, 1 inch (25.4 mm) from the top of
the paper. If you are using software to specify the
top margin of the page, change the default setting
to 1/6 inch (4.2 mm).
See the section Print Position Adjustment Items
CONFIG None You can change the printer’s primary
configuration.
See the section Configuration Items and
Options later in this chapter.
GAP-ADJ None If you adjust the gap manually or fix the gap,
change the setting.
See the section Print Head Gap Adjustment
Items and Options.
5-12 User's Manual