Filter
Top Products
SETTING UP
6. Press the ribbon release levers inward until the mounting pins snap
into the holes of the ribbon support brackets. Gently pull on the
cartridge to be sure that the pins are secure in the holes.
7. Turn the ribbon feed knob clockwise to take up any slack in the
ribbon.
8. Close the front cover.
NOTE
A Fujitsu ribbon cartridge is recommended. Don’t use other
cartridges. If other cartridges are used, operating problems or a
damage of the print head may be caused.
Selecting the Tractor Unit Position
NOTE
This printer uses a detachable tractor that can be used on either the
front or back of the printer. You can attach the tractor to either the
front or back of the printer according to your installation or
operating conditions. The printer is delivered to you with the tractor
attached to the front. You can detach it from the front and then
attach it to the back if needed.
See “SELECTING PAPER PATH” in Chapter 3.
2-10 User's Manual