Filter
Top Products
USING SETUP MODE
Table 5.5 ADJUST Items and Options (Cont.)
NOTE: Underlined options are the factory defaults.
HARDWRE
Items
Options Description
<FCUTORG> 1/6 IN
.8/6 IN1
:
6/6 IN
Sets the top-of-form for front single
top of the page.
r top
ecified. A
nch is preferable when
:
6/6 IN
6
sheets in increments of 1/6 inch (4.2
mm) from the physical
The default is recommended if you
margin is not software-sp
setting of 1/6 i
your top margin is software-specified.
<FCUTFIN>
0/180
, ..., 29/180
-of-form position for
ncrements of
Fine-tunes the top
front single sheets.
Increases top-of-form in i
1/180 inch
(0.14 mm).
<RCUTORG> 1/6 IN
1.8/6 IN
:
6/6 IN
:
66/6 IN
Sets the top-of-form for rear single
sheets in increments of 1/6 inch (4.2
mm) from the physical top of the page.
The default is recommended if your top
.
margin is not software-specified. A
setting of 1/6 inch is preferable when
your top margin is software-specified
<RCUTFIN>
0/180
, ..., 29/180
Fine-tunes the top-of-form position for
rear single sheets.
Increases top-of-form in increments of
1/180 inch
(0.14 mm).
5-34 User's Manual